Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , DOUBLE ANGLE
Definition:
A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH ARE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.
CAGE Information
| Code | Company |
|---|---|
| 0NV92 | COMPRO COMPUTER SERVICES INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625E,TY II,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHQB | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 1.800 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | MAIN SURFACE HAS 2 EACH 0.120 INCH DIAMETER THRU HOLES LOCATED CENTEREDAT 1.300 INCHES APART AND 0.387 INCHESFROM FRONT EDGE;LEGS HAVE ONE THRU HOLE EACH OF 0.095 INCH DIAMETER LOCATED 0.145 INCHES FROM BOTTOM EDGE AND 0.093 INCHES FROM REAR EDGE;LEGS ALSO HAVETWO ADDITIONAL HOLES EACH, COUNTERBORED AT 90 DEGREES LOCATED AT 0.338 INCHES FROM BACK AND BOTTOM EDGES |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AHPW | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HINGE,EMERGENCY COVER,TRIM CONTROL PANEL |
| AHQA | CENTER SECTION WIDTH | 0.547 INCHES NOMINAL |
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.517 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ADJACENT ANGLES |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.517 INCHES NOMINAL |